AD8619WARUZ-R7
Or copy the link below:
- Mfr.Part #
- AD8619WARUZ-R7
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14TSSOP
- Stock
- 1
- In Stock ：
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Circuits :
- 4
- Current - Input Bias :
- 0.2pA
- Voltage - Input Offset :
- 400μV
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Moisture Sensitivity Level (MSL) :
- 3 (168 Hours)
- Current - Supply :
- 38μA
- Mounting Type :
- Surface Mount
- Lifecycle Status :
- Production (Last Updated: 3 weeks ago)
- Current - Output / Channel :
- 80mA
- Operating Supply Current :
- 152μA
- Voltage Gain :
- 113.98dB
- Amplifier Type :
- GENERAL PURPOSE
- Input Capacitance :
- 2.5pF
- Mount :
- Surface Mount
- Number of Pins :
- 14
- Lead Free :
- Contains Lead
- Factory Lead Time :
- 14 Weeks
- Series :
- Automotive
- Settling Time :
- 23 μs
- Quiescent Current :
- 38μA
- Max Supply Voltage :
- 5V
- Supplier Device Package :
- 14-TSSOP
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5V ±0.9V~2.5V
- Output Type :
- Rail-to-Rail
- Operating Supply Voltage :
- 3V
- Common Mode Rejection Ratio :
- 95 dB
- Packaging :
- Tape and Reel (TR)
- Operating Temperature :
- -40°C~125°C
- Max Operating Temperature :
- 125°C
- RoHS Status :
- ROHS3 Compliant
- Power Supply Rejection Ratio (PSRR) :
- 94dB
- Output Current per Channel :
- 80mA
- Max Dual Supply Voltage :
- 2.5V
- Base Part Number :
- AD8619
- Gain Bandwidth Product :
- 400kHz
- Input Offset Voltage (Vos) :
- 2.2mV
- Min Dual Supply Voltage :
- 900mV
- Slew Rate :
- 0.1V/μs
- Min Operating Temperature :
- -40°C
- Min Supply Voltage :
- 1.8V
- Number of Elements :
- 4
- Nominal Supply Current :
- 152μA
- Datasheets
- AD8619WARUZ-R7
80mA per Channel 0.2pA 95 dB Instrumentational OP Amps 3V 1.8V~5V ±0.9V~2.5V AD8619 14-TSSOP (0.173, 4.40mm Width)
AD8619WARUZ-R7 Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 152μA, this op amp ic can operate. 113.98dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 4 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 125°C should be used. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 3V. As a result, it is recommended that a power supply of 38μA be used with this electronic part. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 5V. A high supply voltage of more than 1.8V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 2.5V volts. As the name implies, Automotive refers to the series of the buffer op amp. Currently, linear amplifier is operating with a quiescent current of 38μA.
AD8619WARUZ-R7 Features
113.98dB voltage gain
Output Type: Rail-to-Rail
AD8619WARUZ-R7 Applications
There are a lot of Analog Devices Inc.
AD8619WARUZ-R7 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
