74LVC1G74GD,125
Or copy the link below:
- Mfr.Part #
- 74LVC1G74GD,125
- Manufacturer
- NXP Semiconductors
- Package / Case
- 8-XFDFN
- Datasheet
- Download
- Description
- IC D-TYPE POS TRG SNGL 8XSON
- Stock
- 37,525
- In Stock ：
- 37,525
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- NXP Semiconductors
- Product Category :
- Unclassified
- Mount :
- Surface Mount
- Operating Temperature :
- -40°C~125°C TA
- fmax-Min :
- 200 MHz
- Published :
- 2005
- Lead Free :
- Lead Free
- Clock Edge Trigger Type :
- POSITIVE EDGE
- Package / Case :
- 8-XFDFN
- Output Type :
- Differential
- Number of Bits :
- 1
- Family :
- LVC/LCX/Z
- Current - Output High, Low :
- 32mA 32mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Polarity :
- Non-Inverting
- Factory Lead Time :
- 8 Weeks
- Quiescent Current :
- 100nA
- Prop. Delay@Nom-Sup :
- 5.9 ns
- Turn On Delay Time :
- 2.5 ns
- Supply Voltage :
- 1.8V
- Number of Circuits :
- 1
- Max I(ol) :
- 0.024 A
- Peak Reflow Temperature (Cel) :
- 260
- JESD-609 Code :
- e4
- Input Capacitance :
- 4pF
- Function :
- Set(Preset) and Reset
- Base Part Number :
- 74LVC1G74
- Current - Quiescent (Iq) :
- 40μA
- Number of Pins :
- 8
- Terminal Pitch :
- 0.5mm
- Power Supplies :
- 3.3V
- Voltage - Supply :
- 1.65V~5.5V
- Height Seated (Max) :
- 0.5mm
- Packaging :
- Tape and Reel (TR)
- Mounting Type :
- Surface Mount
- Max Propagation Delay @ V, Max CL :
- 4.1ns @ 5V, 50pF
- Radiation Hardening :
- No
- Length :
- 3mm
- Logic Function :
- AND, D-Type
- Series :
- 74LVC
- Width :
- 2mm
- Terminal Position :
- Dual
- Packing Method :
- Tape and Reel
- Time@Peak Reflow Temperature-Max (s) :
- 30
- Clock Frequency :
- 200MHz
- Contact Plating :
- Gold
- RoHS Status :
- RoHS Compliant
- Number of Terminations :
- 8
- Max Supply Voltage (DC) :
- 5.5V
- Propagation Delay :
- 3.5 ns
- Trigger Type :
- POSITIVE EDGE
- Type :
- D-Type
- Datasheets
- 74LVC1G74GD,125
1.65V~5.5V 200MHz 1 Bit D-Type Flip Flop DUAL 74LVC1G74 8 Pins 40μA 74LVC Series 8-XFDFN
74LVC1G74GD,125 Overview
It is packaged in the way of 8-XFDFN. D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Differential. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 1.65V~5.5V. The operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74LVC series. Its output frequency should not exceed 200MHz. It consumes 40μA of quiescent current without being affected by external factors. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74LVC1G74 family. It is powered from a supply voltage of 1.8V. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. It is designed with 8 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This flip flop is designed with 1 Bits. 1 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It operates from 3.3V power supplies. It consumes 100nA of quiescent current without being affected by external factors.
74LVC1G74GD,125 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
74LVC1G74GD,125 Applications
There are a lot of Nexperia USA Inc.
74LVC1G74GD,125 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
