74AUP2G80DC,125
Or copy the link below:
- Mfr.Part #
- 74AUP2G80DC,125
- Manufacturer
- Nexperia
- Package / Case
- 8-VFSOP (0.091, 2.30mm Width)
- Datasheet
- Download
- Description
- 74AUP2G80 - LOW-POWER DUAL D-TYP
- Stock
- 2,900
- In Stock ：
- 2,900
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Nexperia
- Product Category :
- Flip Flops
- Quiescent Current :
- 500nA
- Output Current :
- 20mA
- Number of Circuits :
- 2
- Number of Bits per Element :
- 1
- Number of Output Lines :
- 1
- Family :
- AUP/ULP/V
- Number of Terminations :
- 8
- Terminal Form :
- Gull wing
- Radiation Hardening :
- No
- Voltage - Supply :
- 0.8V~3.6V
- Operating Temperature :
- -40°C~125°C TA
- Propagation Delay :
- 20.7 ns
- Published :
- 2010
- Packaging :
- Tape and Reel (TR)
- Output Type :
- INVERTED
- Number of Pins :
- 8
- Function :
- Standard
- Mounting Type :
- Surface Mount
- Polarity :
- Inverting
- Supply Voltage :
- 1.2V
- RoHS Status :
- ROHS3 Compliant
- REACH SVHC :
- No SVHC
- Input Capacitance :
- 0.6pF
- Package / Case :
- 8-VFSOP (0.091, 2.30mm Width)
- Clock Frequency :
- 309MHz
- JESD-609 Code :
- e4
- Turn On Delay Time :
- 2.2 ns
- Current - Output High, Low :
- 4mA 4mA
- Base Part Number :
- 74AUP2G80
- Contact Plating :
- Gold
- Trigger Type :
- POSITIVE EDGE
- Terminal Pitch :
- 0.5mm
- Peak Reflow Temperature (Cel) :
- 260
- Mount :
- Surface Mount
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Max Propagation Delay @ V, Max CL :
- 6.4ns @ 3.3V, 30pF
- Clock Edge Trigger Type :
- POSITIVE EDGE
- Terminal Position :
- Dual
- Factory Lead Time :
- 8 Weeks
- Type :
- D-Type
- Time@Peak Reflow Temperature-Max (s) :
- 30
- Supply Voltage-Max (Vsup) :
- 3.6V
- Series :
- 74AUP
- Datasheets
- 74AUP2G80DC,125
0.8V~3.6V 309MHz D-Type Flip Flop DUAL 74AUP2G80 8 Pins 74AUP Series 8-VFSOP (0.091, 2.30mm Width)
74AUP2G80DC,125 Overview
It is packaged in the way of 8-VFSOP (0.091, 2.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 0.8V~3.6V. The operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74AUP series. Its output frequency should not exceed 309MHz. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74AUP2G80 family. It is powered from a supply voltage of 1.2V. The input capacitance of this T flip flop is 0.6pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of AUP/ULP/V. This electronic part is mounted in the way of Surface Mount. It is designed with 8 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The maximal supply voltage (Vsup) reaches 3.6V. 2 circuits are used to achieve its superior flexibility. The output current of 20mA makes it feature maximum design flexibility. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 500nA of quiescent current without being affected by external factors.
74AUP2G80DC,125 Features
Tape & Reel (TR) package
74AUP series
8 pins
74AUP2G80DC,125 Applications
There are a lot of Nexperia USA Inc.
74AUP2G80DC,125 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
