54FCT162244ATEB
Or copy the link below:
- Mfr.Part #
- 54FCT162244ATEB
- Manufacturer
- Intersil (Renesas Electronics Corporation)
- Package / Case
- 48-CFlatPack
- Datasheet
- Download
- Description
- IC BUF NON-INVERT 5.5V 48CERPACK
- Stock
- 5,178
- In Stock ：
- 5,178
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Intersil (Renesas Electronics Corporation)
- Product Category :
- Buffers, Drivers, Receivers, Transceivers
- Supplier Device Package :
- 48-CERPACK
- Number of Bits per Element :
- 4
- Control Type :
- ENABLE LOW
- Propagation Delay :
- 6.5 ns
- High Level Output Current :
- -16mA
- Package / Case :
- 48-CFlatPack
- Number of Functions :
- 4
- Lead Free :
- Contains Lead
- Temperature Grade :
- Military
- Number of Elements :
- 4
- Polarity :
- Non-Inverting
- Length :
- 16.3mm
- Min Operating Temperature :
- -55°C
- Power Supplies :
- 5V
- Mount :
- Surface Mount
- Logic Function :
- Buffer, Inverting
- Number of Terminations :
- 48
- Output Type :
- 3-STATE
- Terminal Pitch :
- 0.635mm
- Number of Outputs :
- 16
- ECCN Code :
- EAR99
- JESD-609 Code :
- e0
- Thickness :
- 2.4mm
- Reach Compliance Code :
- not_compliant
- Quiescent Current :
- 500μA
- Terminal Position :
- Dual
- Logic IC Type :
- BUS DRIVER
- Terminal Form :
- Flat
- Supply Voltage :
- 5V
- Terminal Finish :
- Tin/Lead (Sn/Pb)
- Max Operating Temperature :
- 125°C
- Packaging :
- Rail/Tube
- RoHS Status :
- Non-RoHS Compliant
- Operating Supply Voltage :
- 5V
- Series :
- --
- Factory Lead Time :
- 10 Weeks
- Pbfree Code :
- No
- Input Type :
- --
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Number of Ports :
- 2
- Prop. Delay@Nom-Sup :
- 5.1 ns
- Load Capacitance :
- 50pF
- Peak Reflow Temperature (Cel) :
- 240
- Current - Output High, Low :
- 16mA, 16mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Temperature :
- -55°C ~ 125°C (TA)
- Min Supply Voltage :
- 4.5V
- Number of Pins :
- 48
- Family :
- FCT
- Screening Level :
- MIL-STD-883 Class B
- Width :
- 9.65mm
- Published :
- 2009
- Output Characteristics :
- 3-STATE
- Low Level Output Current :
- 16mA
- Qualification Status :
- Not Qualified
- Logic Type :
- Buffer, Non-Inverting
- Mounting Type :
- Surface Mount
- Max Supply Voltage :
- 5.5V
- Voltage - Supply :
- 4.5 V ~ 5.5 V
- Contact Plating :
- Lead, Tin
- Additional Feature :
- MAX OUTPUT SKEW = 0.5NS; TYP VOLP < 0.6V @ VCC = 5V, TA = 25 DEGREE C
- Pin Count :
- 48
- Datasheets
- 54FCT162244ATEB
DUAL Buffer, Non-Inverting 4.5 V ~ 5.5 V 3-State Buffers -- Series 48 Pins 4 Bit per Element 16mA, 16mA 48-CFlatPack
54FCT162244ATEB Overview
This package uses 48-CFlatPack. A logical driver using the Rail/Tube external packaging is used in this application. Buffers like this are available in the Surface Mount-mount form factor. Buffer, Non-Inverting logic integrated circuits see a wide range of applications, as shown here. There is a supply voltage of 4.5 V ~ 5.5 V applied to this ethernet transceiver in order to power it. In ambient temperatures up to -55°C ~ 125°C (TA), this voltage buffer is designed to operate. There is a 16mA, 16mA output current for the high and low logic states. A total of 3-State outputs can be dealt with by transceiver. It is necessary to use all 4 elements. A transceiver of the -- series, it belongs to the -- series. Thebuffer features 48 terminations that serve different purposes. 5V is the required supply voltageThis electronic part is part of the FCT family of parts. With the electrical component, 48 pins are set. This logical driver is suitable for Surface Mount different applications. In total, it has 48 pins. The transceiver features 2 ports for enhanced functionality. Each element uses 4 bits. During quiescent state, the electronic part uses 500μA. The recommended power supply is 5V. Users are advised to apply 5V supply voltage to the electronic part for the part to operate safely and reliably. With MAX OUTPUT SKEW = 0.5NS; TYP VOLP < 0.6V @ VCC = 5V, TA = 25 DEGREE C, you can better serve your customers. A temperature as low as -55°C can be tolerated by this buffer. There should be no more than 125°C ambient temperature for the logical driver to operate. As a low-level output mode, it produces 16mA. During high-level output, the electronic part may conduct -16mA. At least 4.5V should be used in order to run this automotive buffer on a continuous basis. Approximately 5.5V are the maximum supply voltages. There is an bus transceiver called a BUS DRIVER logic chip. There is a voltage buffer package 48-CERPACK available as a supplier for this part. This is sufficient to produce 16 outputs from it. This electronic part has increased application versatility using the -- input technology. Buffer ICs are controlled by ENABLE LOW control technology during startup.
54FCT162244ATEB Features
MAX OUTPUT SKEW = 0.5NS; TYP VOLP < 0.6V @ VCC = 5V, TA = 25 DEGREE C
High Level Output: 16mA
Low Level Output: -16mA
BUS DRIVER Logic IC
54FCT162244ATEB Applications
There are a lot of Integrated Device Technology (IDT)
54FCT162244ATEB Buffers & Transceivers applications.
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
- Satellite radio receiver
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
