MCP603-I/ST
- Mfr.Part #
- MCP603-I/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8TSSOP
- Stock
- 398
- In Stock :
- 398
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product Status :
- Active
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Maximum Operating Temperature :
- + 85 C
- Output Current per Channel :
- 22mA
- Output Current :
- 22mA
- Radiation Hardening :
- No
- Shutdown :
- Shutdown
- Power :
- No
- Supplier Device Package :
- 8-TSSOP
- Package :
- Tube
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Temperature :
- -40°C~85°C
- Nominal Supply Current :
- 230μA
- RoHS Status :
- ROHS3 Compliant
- Factory Lead Time :
- 10 Weeks
- Number of Functions :
- 1
- Maximum Operating Supply Voltage :
- 6 V
- Minimum Operating Temperature :
- - 40 C
- Published :
- 2004
- Programmable Power :
- No
- Series :
- --
- Base Part Number :
- MCP603
- Power Supplies :
- 3/5V
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Terminal Position :
- Dual
- Package Shape :
- RECTANGULAR
- Voltage Gain :
- 115dB
- Pbfree Code :
- yes
- Seated Height-Max :
- 1.1 mm
- Terminal Pitch :
- 0.65mm
- Length :
- 4.4mm
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Brand :
- Microchip Technology
- Unity Gain BW-Nom :
- 2800 kHz
- Current - Supply :
- 230μA
- Amplifier Type :
- GENERAL PURPOSE
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Form :
- Gull wing
- Input Offset Voltage-Max :
- 3000 µV
- Qualification :
- AEC-Q100
- Manufacturer :
- Microchip
- Voltage - Input Offset :
- 700µV
- Mounting Type :
- Surface Mount
- RoHS :
- Details
- Supply Current-Max :
- 0.325 mA
- Input Offset Voltage (Vos) :
- 2mV
- Low-Bias :
- yes
- ECCN Code :
- EAR99
- Temperature Grade :
- Industrial
- Number of Pins :
- 8
- Product Type :
- Op Amps - Operational Amplifiers
- Surface Mount :
- yes
- JESD-609 Code :
- e3
- Shut Down Support :
- No
- Number of Channels per Chip :
- 1
- HTS Code :
- 8542.33.00.01
- Pin Count :
- 8
- Operating Supply Voltage :
- 5.5V
- Voltage Gain-Min :
- 56200
- Qualification Status :
- Not Qualified
- Mounting Style :
- SMD/SMT
- Height :
- 1 mm
- Power Supply Type :
- Single
- Wideband :
- No
- Mount :
- Surface Mount
- JESD-30 Code :
- R-PDSO-G8
- Voltage Gain dB :
- 115 dB
- Architecture :
- VOLTAGE-FEEDBACK
- Micropower :
- yes
- Width :
- 4.4 mm
- Frequency Compensation :
- yes
- Low-Offset :
- No
- Number of Terminals :
- 8
- Supply Type :
- Single
- Product :
- Operational Amplifiers
- Number of Terminations :
- 8
- Gain Bandwidth Product :
- 2.8MHz
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Supplier Package :
- TSSOP
- Base Product Number :
- MCP603
- Number of Channels :
- 1 Channel
- Mounting :
- Surface Mount
- Type :
- General Purpose Amplifier
- Current - Output / Channel :
- 22mA
- Reach Compliance Code :
- Compliant
- Slew Rate :
- 2.3V/µs
- Number of Elements :
- 1
- Supply Voltage :
- 5V
- Lead Free :
- Lead Free
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Current - Input Bias :
- 1pA
- Number of Circuits :
- 1
- Screening Level :
- Industrial
- Product Category :
- Operational Amplifiers - Op Amps
- Packaging :
- Tube
- Operating Supply Current :
- 230μA
- Terminal Finish :
- Matte Tin (Sn)
- Output Type :
- Rail-to-Rail
- Supply Voltage Limit-Max :
- 7V
- Common Mode Rejection Ratio :
- 75 dB
- Datasheets
- MCP603-I/ST
1 Channel Channels 22mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00006μA 5.5V 2.7V~6V MCP603 8 Pins 8-TSSOP (0.173, 4.40mm Width)
MCP603-I/ST Overview
Packaged in a 8-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 230μA, this op amp ic can operate. 115dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 Channel channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 5.5V. As a result, it is recommended that a power supply of 230µA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 56200. The buffer op amp is equipped with 8 terminals for attaching wires to it.
MCP603-I/ST Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP603-I/ST Applications
There are a lot of Microchip Technology
MCP603-I/ST Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















